Select Page

Our Services

Engineering

The first step in a successful project organization starts

with engineering.

AL-ROWWAD company provides a full range of

engineering services from project development and studies

to operations and maintenance services.

Specializing in the field of Energy and Power projects, we

are well positioned and qualified to meet the global needs.

 

 

 

 

 

 

 

 

 

 

 

Installation

Entire assembly of a facility is realized from the first

entrance point of energy, starting with planned

mobilization, erection works and finishes with testing and

commissioning with AL-ROWWAD expert engineers and

technicians.

– Power Plants.

– HV & MV Substations (AIS – GIS).

– Industrial Facilities.

– GIS & AIS Installation Up to 380 kV (Gas Insulated

Switchgears).

– AIS & GIS Medium Voltage Switchgear Installation.

– Low-Voltage, Control, SCADA, communication, MCC etc.

– All kind of Transformers Installation.

– All kind of Cables & cable terminations works.

– Earthing & Lightning Installation.

– Steel Construction Installation.

– All kind of Lighting System Installation.

– LV & MV Isolated Bus ducts.

Testing & Commissioning

AL-ROWWAD was developed by a team of experienced

substation services commissioning engineers, to meet the

needs of the ever evolving technical aspects of the

substation services.

– Entire Tests of HV-MV-LV Switchgears.

– Transformer Tests.

– Protection & Control Tests.

– Primary Injection Tests.

– Secondary Injection Tests.

– DC System Tests (Chargers & Batteries).

– Cable Tests.

– SCADA System Tests.

– Communication System Tests.

– Measurement System Tests.

– Dielectric Tests.

– Chemical and Electrical Tests of Oil.

– Gas Analysis Test of Oil.

– Grounding Resistance and Ground Impedance

Measurements.

Switchgear Maintenance

Entire electric distribution systems maintenance

is performed for increasing operating times of working

facilities, and decreasing cutoff times. AL-ROWWAD is

providing preventive & emergency maintenance services

and by going to facility in breakdown situations.

– Full Maintenance of HV-MV-LV Switchgear Facilities.

– Transformer Maintenance.

– Maintenance and Calibration of Protection Relays.

– Maintenance and Calibration of Measuring Instruments.

– Compensation Maintenance.

– DC System Maintenance.

– SCADA and Signal Systems Maintenance.

– Communication System Maintenance.

– Grounding Measurements.

– Thermal Camera Analysis.

– Prepared Maintenance reports and results, problems and

solutions are sent to our customers.

 

 

Training Services

– Protection Relays Training.

– Protection System Training.

– Primary Equipment Training.

– The usage of Testing Devices Training.

– Installation Procedures Training.

– Testing & Commissioning Procedures Training.

– SpecificTraining for Facilities.

– Schematic Reading Training.

– SCADA System Training.

– Communication System Training.

 

Business Area

– Outdoor Air Insulated Switchgears.

– Gas Insulated Switchgear.

– Power Plants.

– Industrial Facilities

– Shopping Centers.

– Substations.

– Hospitals.

– Hotels.

– Airports.

– Petrochemical Refineries.

– Oil & Gas Industry.

Transformers Oil filling & Purifying Machine

9000 L/h Purifying Capacity
Magnetic filter
Degassing process
Two Vacuum pump
Three heaters (30 KW each)
Up to 80 C

Cable Terminations & Joints

Installing all type of termination and joint for MV and LV cables.
Raychem @ Jordan Agent & Distributor.
Certified work team up to 42 KV.

Vacuum Machine

Siemens vacuum pumps
33 mbar Limiting Vacuum
Two empty tanks 17m3 each
Portable Dielectric Breakdown Voltage for Oil
Complete oil analysis in private laboratory in Jordan

Cable Testing

DC HI pot Testing (up to 120 KV)
VLF Cable Testing (up to 68 KV)
Cable fault lacator for single & three core MV & LV (10 KV testing voltage)
Insulation Resistance Testing (up to 10 KV)

Engineering

The first step in a successful project organization starts with engineering.

AL-ROWWAD company provides a full range of engineering services from project development and studies to operations and maintenance services.

Specializing in the field of Energy and Power projects, we are well positioned and qualified to meet the global needs.

Installation

Entire assembly of a facility is realized from the first entrance point of energy, starting with planned mobilization, erection works and finishes with testing and commissioning with AL-ROWWAD expert engineers and technicians.

  • Power Plants.
  • HV & MV Substations (AIS – GIS).
  • Industrial Facilities.
  • GIS & AIS Installation Up to 380 kV (Gas Insulated Switchgears).
  • AIS & GIS Medium Voltage Switchgear Installation.
  • Low-Voltage, Control, SCADA, communication, MCC etc.
  • All kind of Transformers Installation.
  • All kind of Cables & cable terminations works.
  • Earthing & Lightning Installation.
  • Steel Construction Installation.
  • All kind of Lighting System Installation.
  • LV & MV Isolated Bus ducts.

Testing & Commissioning

AL-ROWWAD was developed by a team of experienced substation services commissioning engineers, to meet the needs of the ever evolving technical aspects of the substation services.

  • Entire Tests of HV-MV-LV Switchgears.
  • Transformer Tests.
  • Protection & Control Tests.
  • Primary Injection Tests.
  • Secondary Injection Tests.
  • DC System Tests (Chargers & Batteries).
  • Cable Tests.
  • SCADA System Tests.
  • Communication System Tests.
  • Measurement System Tests.
  • Dielectric Tests.
  • Chemical and Electrical Tests of Oil.
  • Gas Analysis Test of Oil.
  • Grounding Resistance and Ground Impedance Measurements.

Switchgear Maintenance

Entire electric distribution systems maintenance is performed for increasing operating times of working facilities, and decreasing cutoff times. AL-ROWWAD is providing preventive & emergency maintenance services and by going to facility in breakdown situations.

  • Full Maintenance of HV-MV-LV Switchgear Facilities.
  • Transformer Maintenance.
  • Maintenance and Calibration of Protection Relays.
  • Maintenance and Calibration of Measuring Instruments.
  • Compensation Maintenance.
  • DC System Maintenance.
  • SCADA and Signal Systems Maintenance.
  • Communication System Maintenance.
  • Grounding Measurements.
  • Thermal Camera Analysis.
  • Prepared Maintenance reports and results, problems and solutions are sent to our customers.

Training Services

  • Protection Relays Training.
  • Protection System Training.
  • Primary Equipment Training.
  • The usage of Testing Devices Training.
  • Installation Procedures Training.
  • Testing & Commissioning Procedures Training.
  • SpecificTraining for Facilities.
  • Schematic Reading Training.
  • SCADA System Training.
  • Communication System Training.

Business Area

  • Outdoor Air Insulated Switchgears.
  • Gas Insulated Switchgear.
  • Power Plants.
  • Industrial Facilities
  • Shopping Centers.
  • Substations.
  • Hospitals.
  • Hotels.
  • Airports.
  • Petrochemical Refineries.
  • Oil & Gas Industry.